(as of May 26,2022 18:42:56 UTC – Details)
InnoMaker HiFi DAC Audio Hat for Raspberry Pi
The Innomaker HiFi DAC Hat maybe the best optimized partner for Raspberry Pi audio output. Used on-board PCM5122 as the IIS clock master, instead of the clocks from RPI which comes with too much jitter. Added dual low jitter oscillators(45.158M and 49.152M) to support more exact sample rate clocks. No soldering, no additional cables. Just plug it in and do some simple configuration, You would get a high-class music player which is low-cost.
TI PCM5122 Chipset
Audiophile Texas Instruments 32bit/384KHz DAC PCM5122
DAC SNR is 112Db. DAC THD+N @ -1 dBFS -78dB. Full Scale Output of DAC is 2.1Vrms. Dynamic Range of DAC is 112dB. Sampling Frequency ranges from 8kHz to 384kHz. Ultra-low noise voltage regulators for optimal audio performance.
Stero Directpath Headpfone Amplifier TPA6130A2
Integrated EEPROM for automatic configuration(Option). Automatically switching frequencies according to the input I2S signals. Dual low jitter crystal oscillators for Master Clock generation. Infrared remote control connector (using GPIO26). DAC output coupled with Film capacitor.
Compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+, A+, A with the 40-pin connector.
Gold Plated RCA output connector
3.5mm Audio Jack
High-quality 3.5mm stereo audio jack. With 138mw headphone Amplifier can directly drive headphone.
High Precision Oscillators
45.1584M and 49.152M two hight precision oscillators
German WIMA professional-level film capacitance
In “Output” setting page, must seleted Output Device/DAC Model: Allo BOSS.We use two low jitter oscillators (45.158M and 49.152M) on-board to support more exact sample rate. It’s way better than many other DAC module. If you make wrong driver setting, the dac module may play abnormal (for example: playback at double speed via HiFi-Berry driver).
[ Key Features: ]
Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality.Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack.With 138mw headphone Amplifier can directly drive headphone.Work status indicators facilitate the understanding of the system working status.DAC SNR is 112Db.DAC THD+N @ -1 dBFS -78dB.Full Scale Output of DAC is 2.1Vrms.Dynamic Range of DAC is 112dB.Sampling Frequency ranges from 8kHz to 384kHz.Ultra-low noise voltage regulators for optimal audio performance.Integrated EEPROM for automatic configuration(Option).Automatically switching frequencies according to the input I2S signals.Dual low jitter crystal oscillators for Master Clock generation.Infrared remote control connector (using GPIO26).
Is Discontinued By Manufacturer : No
Package Dimensions : 5 x 3.4 x 1.8 inches; 2.4 Ounces
Date First Available : May 11, 2018
Manufacturer : innomaker
ASIN : B07D13QWV9
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
Absolutely perfect to support all Raspberry Pi music playback system, like LibreElec, OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the goods).